MAGO technology, Train detector, Train Sensor, RA-500, Magnetic Sensor, Radar

TRAIN/LEVEL

Other sensors

RA-500 TRAIN detection sensor

RA-500 is an innovative train sensor that has a smart signal processing unit, and it is internally composed of 2 sensors of elaborate magnetic and 60GHz RADAR sensor to detect a train on railways. It detects only trains and do not make false alarm for rain or snow under various noises on the railway.

Detection a train on railroad with the high reliability is not a easy task because of the many kinds of severe noise exists around railways. MAGO technology has the special signal processing technology for detecting trains on railway of harsh environment.

CP100 Water level sensor

The CP100 water level sensor is an innovative sensor specifically designed for detecting water levels in rivers and reservoirs, integrating advanced RADAR and water level measurement lens technology.
Equipped with a radar system and a dedicated water level measurement lens optimized for river level monitoring, it enables real-time, non-contact water level measurement up to a maximum distance of 20 meters.
It can be easily attached to bridge side structures and transmits real-time water surface height data via LAN.

RA Sensor Technology

RA-500

RA-500 sensor can be installed both on the side of railways or on the center of two rails. The sensor includes the novel PCR radar, specially designed dielectric lens(patent pending), elaborate magnetic sensor and signal processing unit to eliminate noises from various EMI sources near the rail road.

Both of a magnetic sensor and a millimeter wave radar are embedded in RA-500, so heavy rain or snow can not affect the performance of the sensor. RA-500 detects the movement and stop of a train, and user can easily connect the output of the sensor to an user's device by a relay controller.

Using the relay(dry switch) in a relay controller, user can easily build up an alarming system for the safety of constructors or pedestrians.

< at the side of the railroad >

< at the center of the railroad >

LD SENSOR (car / train)

CARDET-LD sensor is single point LIDAR sensor for mid-long range vehicle sensing including railroad car.

It can be installed at the side pole of the track with a reflex plate below, or at the higher place with a declined angle without reflex plate.

Conventional IR sensor measures simply the quantity of reflexed light, so the noise light from Sun directly affect the performance of the IR sensor, but CARDET-LD measures TOF (Time of Flight) with a special LASER burst not just the quantity of the beam. This principle makes CARDET-LD sensor has such a strong characteristics against Sun and bright noisy lights.

Owing to the sensing principle of TOF light sensor, it can be used in very heavy electro magnetic noise environment such as a rail road or inside factory with confidence.

CARDET-LD detects the approach and pass of a train, and user can easily connect the output of the sensor to an user's device by a relay controller.

< Using reflex sheet >

< Using PC railraoad tie >

CP100

The CP100 sensor is a non-contact water level measurement sensor that provides real-time monitoring of water surface height in rivers and reservoirs.
Equipped with advanced millimeter-wave RADAR and a dedicated dielectric lens for water surface reflection, the CP100 sensor accurately measures river water levels in 5mm increments and can detect up to 20 meters from the installation height.
Once set based on the installation height, the CP100 sensor features a built-in function that outputs real-time changes in water surface height, making it highly convenient for disaster prevention and safety management during heavy rainfall and floods.
A built-in LAN output device is included by default, enabling seamless data transmission and reception from anywhere nationwide via an internet connection.

1 RA-500
Basic Set

RA-500 is a brand new train sensor that is designed to detect a train on a railway where much electromagnetic noise exist.

Relay controller that is included in the sensor basic set makes it easy to connect the sensor to users system. Users can build up safer environment around railway or train garage with RA-Series with small effort and low price.

Composed of:

RA-500 Sensor Head + Relay Controller

2 CARDET-LD
Basic Set

Relay controller has a RELAY for interface the sensor to users system very easily. Users can build up safer environment around railway or train garage with a train sensor with easy effort and low price.

Composed of:

LD Sensor Head + Relay Controller + Bracket + Cover + Reflex sheet

3 CP100
LAN interface

The real-time water level sensor CP100 comes with a built-in LAN interface, allowing easy internet connectivity to the user's system.

The integrated LAN interface can be effortlessly connected to a local intranet, and by using an LTE wireless modem, internet access is extremely simple even in remote mountainous areas or near rivers. With CP100, users can measure and receive real-time alerts for water levels in local rivers, reservoirs, main river channels, and tributaries with a high resolution of 5mm.

It is highly suitable for risk detection systems in riverside parking lots, which are commonly found near waterways.

Composed of:

CP100 sensor head + LAN interface

Train sensor Installation reference

[RA-400] New Train sensor

RA-400 embeds an innovative millimeter wave radar and a F.S. magnetic sensor which enables the stable detection of a train in a bunch of noises near a railroad. It is the simplest way to detect a train with the highest reliability.

[RA-201] Train detector RA-201

RA-201 is the best solution to detect of approaching a train by a non-contact way. RA-201 works perfectly even it is completely covered with snow and fallen leaves. It has a state-of-the art adaptive digital filters for the changing of environments.